Some more Infos for the README
This commit is contained in:
parent
13a4bfb64a
commit
0f1e9bf086
35
README.md
35
README.md
|
@ -4,13 +4,17 @@
|
||||||
|
|
||||||
A Minimalistic Sensor Node for use on TheThingsNetwork.
|
A Minimalistic Sensor Node for use on TheThingsNetwork.
|
||||||
|
|
||||||
![Case Back](https://www.seiichiro0185.org/git/IOT/tinylora/raw/branch/master/case_back.jpg) ![Case Front](https://www.seiichiro0185.org/git/IOT/tinylora/raw/branch/master/case_front.jpg) ![PCB Back](https://www.seiichiro0185.org/git/IOT/tinylora/raw/branch/master/pcb_back.jpg)
|
![Case Front](https://www.seiichiro0185.org/git/IOT/tinylora/raw/branch/master/case_front.jpg)
|
||||||
|
![Case Side](https://www.seiichiro0185.org/git/IOT/tinylora/raw/branch/master/case_side.jpg)
|
||||||
|
![Case Back](https://www.seiichiro0185.org/git/IOT/tinylora/raw/branch/master/case_back.jpg)
|
||||||
|
![PCB Front](https://www.seiichiro0185.org/git/IOT/tinylora/raw/branch/master/pcb_front.jpg)
|
||||||
|
![PCB Back](https://www.seiichiro0185.org/git/IOT/tinylora/raw/branch/master/pcb_back.jpg)
|
||||||
|
|
||||||
### Features
|
### Features
|
||||||
|
|
||||||
* Small Size, only 47x36x15mm populated
|
* Small Size, only 47x36x15mm populated
|
||||||
* Based on widely available Atmel ATTiny84 MCU and RFM95W LoRa-module
|
* Based on widely available Atmel ATTiny84 MCU and RFM95W LoRa-module
|
||||||
* 6 free GPIO-Pins from the ATTiny to connect sensors on a 2.54mm pitch header
|
* 6 free GPIO-Pins from the ATTiny + Power to connect sensors on a 2.54mm pitch header
|
||||||
* Optional on-board LED for status signaling
|
* Optional on-board LED for status signaling
|
||||||
* Powered by a single CR2032 lithium battery
|
* Powered by a single CR2032 lithium battery
|
||||||
* Long battery runtime using the ATTinys deep sleep mode
|
* Long battery runtime using the ATTinys deep sleep mode
|
||||||
|
@ -21,4 +25,29 @@ A Minimalistic Sensor Node for use on TheThingsNetwork.
|
||||||
|
|
||||||
* **Case:** A 3D-Printable Case, OpenSCAD and STL Files
|
* **Case:** A 3D-Printable Case, OpenSCAD and STL Files
|
||||||
* **Firmware:** Example Firmware, platformio project
|
* **Firmware:** Example Firmware, platformio project
|
||||||
* **PCB_SMD:** PCB for SMD components, KiCAD project
|
* **PCB_SMD:** PCB for SMD components, KiCAD project
|
||||||
|
* **PCB_THT:** PCB with through-hole components, KiCAD project, Currently not all Features of the SMD Version
|
||||||
|
|
||||||
|
## Pinouts
|
||||||
|
|
||||||
|
### PRG1 Starting from Marked Top Left Pin
|
||||||
|
|
||||||
|
| | |
|
||||||
|
|----------|----------|
|
||||||
|
| MISO | 3V3 |
|
||||||
|
| SCK | MOSI |
|
||||||
|
| RST | GND |
|
||||||
|
|
||||||
|
|
||||||
|
### J1 Starting from Marked Pin 1
|
||||||
|
|
||||||
|
| Number | Function | Note |
|
||||||
|
|--------|----------|--------------------------------|
|
||||||
|
| 1 | 3V3 | |
|
||||||
|
| 2 | GND | |
|
||||||
|
| 3 | PA0 | i2C SCL in Example Firmware |
|
||||||
|
| 4 | PA1 | i2C SDA in Example Firmware |
|
||||||
|
| 5 | PA2 | |
|
||||||
|
| 6 | PA3 | |
|
||||||
|
| 7 | PA7 | Connected to LED-Pad D1 via R1 |
|
||||||
|
| 8 | PB2 | |
|
Loading…
Reference in a new issue