attnode/v3_firmware
2
0
Fork 0
Code Issues Pull requests Releases Activity
Firmware for the ATTNode v3 https://www.attno.de/12-attnode_v3
47 commits 3 branches 0 tags 755 KiB
C++ 83.7%
C 12.2%
HTML 4.1%
Find a file
Stefan Brand c862eec6d0 Update Readme
2021-05-02 17:17:04 +02:00
.vscode Refactored Sensor Libraries to use Common Interface 2021-02-01 21:21:03 +01:00
include Fix Calibration Routines 2021-03-31 20:15:13 +02:00
lib Add HM330x Particle Sensor Support (#5) 2021-05-02 15:11:48 +00:00
payload Add HM330x Particle Sensor Support (#5) 2021-05-02 15:11:48 +00:00
src Add HM330x Particle Sensor Support (#5) 2021-05-02 15:11:48 +00:00
.gitignore Refactored Sensor Libraries to use Common Interface 2021-02-01 21:21:03 +01:00
LICENSE Add License File 2021-03-03 21:44:13 +01:00
platformio.ini Add HM330x Particle Sensor Support (#5) 2021-05-02 15:11:48 +00:00
README.md Update Readme 2021-05-02 17:17:04 +02:00

README.md

ATTNode v3 Firmware

This is the code repository for ATTNode v3 compatible firmware. At the moment it supports LoRa communication using OTAA and a growing number of sensor, like the BME280 and SHT21 for temperature, humidity and atmospheric pressure, MH-Z19C and SCD30 for CO2 or HM330x for Particulate Matter. It also uses deep sleep to save energy between Measurements.

The firmware is developed using PlatformIO. At least version 5.1.0 is needed for ATTiny3216 support.

Documentation

The full documentation for firmware options, payload decoders and programming can be found at attno.de

Configuration and Programming

To set the fuses for clock speed, BOD levels etc., use the "Set Fuses" operation in PlatformIO. This has to be done once for a "fresh" Node or when the Board Config in platformio.ini was changed. Afterwards it is enough to use the normal "Upload" function for Code or config.h changes.

Before programming a node, copy src/config.h.example to src/config.h and set the used sensor, LoRaWAN keys and other options as needed.

Programming is done using a MicroUPDI Programmer, settings in platformio.ini are set to use it. For other pogrammer options see the PlatformIO Documentation

Payload Decoder

You need to specify a Payload Decoder fitting for your configured Sensors for a Node. See payload/index.html in this repository. Open it in your Browser of Choice and select the enabled sensors. It will generate the Payload Decoder fitting for the choosen Sensors. You can also use the Online Version at attno.de

Configuring via Downlink

It is possible to change the sending interval via Downlink-Packets at runtime. Downlinks for setting the transmit interval have to be sent on port 1. The time between Transmits is specified in minutes (or more exactly, 64 Second intervals) and as a 2 byte value, which will be interpreted as an uint. So for example 0x0001 means 1 Minute, 0x0002 means 2 Minutes and so on. Sending 0xFFFF resets the value to the compiled in default.

Sending an arbitrary value on port 2 will activate the calibration sequence for sensors that support it (like some of the CO2-Sensors).

Acknowledgements

Parts of this code where kindly provided by @shempe