32 lines
1.3 KiB
Text
32 lines
1.3 KiB
Text
|
|
// ATTNode v3 Onboard LED is on PIN_PA7
|
|
#define LED_PIN PIN_PA7
|
|
|
|
// Enable Serial Debugging. Parameters for the Serial Port are 115200
|
|
// #define DEBUG
|
|
|
|
// Define which Sensor is installed
|
|
#define HAS_BME280
|
|
// #define HAS_SHT21
|
|
// #define HAS_NO_SENSOR
|
|
|
|
// How many minutes to sleep between Measuring/Sending
|
|
// Since this is a 2-byte value internally, intervals between 1 and 65536 are possible
|
|
// This is the default interval to use, which can be overwritten via DownLink. If an interval
|
|
// is set via DownLink it will be saved in EEPROM and the time specified here will no longer be used.
|
|
// Actual Sleep Time is SLEEP_TIME*2*32 Seconds due to the 32s sleep intervals of the ATTiny3216
|
|
#define SLEEP_TIME 10
|
|
|
|
// Specify TTN EU Bandplan and LoRa Chip for the LMIC as well as Disabling some unused functions
|
|
// See LMIC documentation / project_config.h for more options
|
|
#define CFG_eu868 1
|
|
#define CFG_sx1276_radio 1
|
|
#define DISABLE_PING
|
|
#define DISABLE_BEACONS
|
|
|
|
// Keys for OTAA Mode
|
|
// APPEUI and DEVEUI from TTN, LSB!
|
|
static const u1_t PROGMEM APPEUI[8]={ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
|
|
static const u1_t PROGMEM DEVEUI[8]={ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
|
|
// APPKey from TTN, MSB!
|
|
static const u1_t PROGMEM APPKEY[16] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
|