// ATTNode v3 Onboard LED is on PIN_PA7
#define LED_PIN PIN_PA7

// Enable Serial Debugging. Parameters for the Serial Port are 115200
// #define DEBUG

// Define which Sensor is installed
#define HAS_BME280
// #define HAS_SHT21
// #define HAS_NO_SENSOR

// How many minutes to sleep between Measuring/Sending
// Since this is a 2-byte value internally, intervals between 1 and 65536 are possible
// This is the default interval to use, which can be overwritten via DownLink. If an interval
// is set via DownLink it will be saved in EEPROM and the time specified here will no longer be used.
// Actual Sleep Time is SLEEP_TIME*2*32 Seconds due to the 32s sleep intervals of the ATTiny3216
#define SLEEP_TIME 10

// Specify TTN EU Bandplan and LoRa Chip for the LMIC as well as Disabling some unused functions
// See LMIC documentation / project_config.h for more options
#define CFG_eu868 1
#define CFG_sx1276_radio 1
#define DISABLE_PING
#define DISABLE_BEACONS

// Keys for OTAA Mode
// APPEUI and DEVEUI from TTN, LSB!
static const u1_t PROGMEM APPEUI[8]={ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
static const u1_t PROGMEM DEVEUI[8]={ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
// APPKey from TTN, MSB!
static const u1_t PROGMEM APPKEY[16] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };