lib/MHZ19C/MHZ19C.cpp

@@ -51,7 +51,7 @@ uint8_t MHZ19C::getSensorData(char * payload, uint8_t startbyte) {
     if (readBytes > 0) {
         switch(buffer[1]) {
             case 0x86:
-                  int16_t value = (buffer[2]*256) + buffer[3];
+                  uint16_t value = (buffer[2]*256) + buffer[3];
                   payload[startbyte]   = (value) & 0xFF;
                   payload[startbyte+1] = (value >> 8) & 0xFF;
                 break;

lib/SENSAIRS8/SENSAIRS8.cpp

@@ -44,7 +44,7 @@ uint8_t SENSAIRS8::getSensorData(char *payload, uint8_t startbyte) {
   payload[startbyte]   = 0x00;
   payload[startbyte+1] = 0x00;
   if (readBytes > 0) {
-    int16_t value =  (buffer[3]*256) + buffer[4];
+    uint16_t value =  (buffer[3]*256) + buffer[4];
     payload[startbyte]   = (value) & 0xFF;
     payload[startbyte+1] = (value >> 8) & 0xFF;
   }

lib/SG112A/SG112A.h

@@ -36,7 +36,7 @@
 #define CMD_GET_SER 0x12  // Get Sensor Serial
 #define CMD_GET_PPM 0x14  // Get Current PPM Reading
 
-class SG112A {
+class SG112A : public AttSensor {
   private:
     uint8_t buffer[SER_BUF_LEN];
 

lib/SHT21/SHT21.h

@@ -37,8 +37,7 @@
 #define SHT21_HUMINOHOLD 0xF5
 #define SHT21_SOFTRESET  0xFE
 
-class SHT21
+class SHT21  : public AttSensor {
-{
     private:
         uint16_t sensorRead(uint8_t command);
 

src/main.cpp

@@ -212,30 +212,32 @@ void do_send(osjob_t* j) {
     for (int i=0; i < NUM_SENSORS; i++)
       curByte = sensors[i]->getSensorData(payload, curByte);
     
-    // Queue Packet for Sending
+    #if defined WS2812B_PIN && (defined HAS_SG112A || defined HAS_MHZ19C || defined HAS_SENSAIRS8)
-    DEBUG_PRINTLN("LoRa-Packet Queued");
-    LMIC_setTxData2(1, payload, sizeof(payload), 0);
-
-    #if defined WS2812B_PIN && (defined HAS_SG112A || defined HAS_MHZ19C)
-
     // CO2 PPM Levels and LED Colors
     // < 1000 ppm green
     // < 1800 ppm yellow
     // > 1000 ppm red
 
-    if (data.ppm > 0 && data.ppm <= 1000) {
+    // Get PPM from Payload:
+    uint16_t ppm = word(payload[2], payload[1]);
+
+    // Set WS2812B-LED accodring to PPM Value
+    if (ppm > 0 && ppm <= 1000) {
       WS2812B_SETLED(0,0,127,0);
-    } else if (data.ppm > 1000 && data.ppm <= 1800) {
+    } else if (ppm > 1000 && ppm <= 1800) {
       WS2812B_SETLED(0,127,127,0);
-    } else if (data.ppm > 1800) {
+    } else if (ppm > 1800) {
       WS2812B_SETLED(0,127,0,0);
     } else {
       WS2812B_SETLED(0,0,0,0);
     }
     #endif // WS2812B
-    #endif // #infdef HAS_NO_SENSOR
 
+    #endif // HAS_NO_SENSOR
     
+    // Queue Packet for Sending
+    DEBUG_PRINTLN("LoRa-Packet Queued");
+    LMIC_setTxData2(1, payload, sizeof(payload), 0);
   }
 }
 
@@ -263,6 +265,7 @@ void setup()
   #endif
 
   // Setup all Sensors
+  // Order of the Sensors here is Order in the Payload
   uint8_t i = 0;
   #ifdef HAS_MHZ19C
     sensors[i] = new MHZ19C();