lib/tinyNeoPixel_Static/COPYING

@@ -1,165 +0,0 @@
-                   GNU LESSER GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-
-  This version of the GNU Lesser General Public License incorporates
-the terms and conditions of version 3 of the GNU General Public
-License, supplemented by the additional permissions listed below.
-
-  0. Additional Definitions.
-
-  As used herein, "this License" refers to version 3 of the GNU Lesser
-General Public License, and the "GNU GPL" refers to version 3 of the GNU
-General Public License.
-
-  "The Library" refers to a covered work governed by this License,
-other than an Application or a Combined Work as defined below.
-
-  An "Application" is any work that makes use of an interface provided
-by the Library, but which is not otherwise based on the Library.
-Defining a subclass of a class defined by the Library is deemed a mode
-of using an interface provided by the Library.
-
-  A "Combined Work" is a work produced by combining or linking an
-Application with the Library.  The particular version of the Library
-with which the Combined Work was made is also called the "Linked
-Version".
-
-  The "Minimal Corresponding Source" for a Combined Work means the
-Corresponding Source for the Combined Work, excluding any source code
-for portions of the Combined Work that, considered in isolation, are
-based on the Application, and not on the Linked Version.
-
-  The "Corresponding Application Code" for a Combined Work means the
-object code and/or source code for the Application, including any data
-and utility programs needed for reproducing the Combined Work from the
-Application, but excluding the System Libraries of the Combined Work.
-
-  1. Exception to Section 3 of the GNU GPL.
-
-  You may convey a covered work under sections 3 and 4 of this License
-without being bound by section 3 of the GNU GPL.
-
-  2. Conveying Modified Versions.
-
-  If you modify a copy of the Library, and, in your modifications, a
-facility refers to a function or data to be supplied by an Application
-that uses the facility (other than as an argument passed when the
-facility is invoked), then you may convey a copy of the modified
-version:
-
-   a) under this License, provided that you make a good faith effort to
-   ensure that, in the event an Application does not supply the
-   function or data, the facility still operates, and performs
-   whatever part of its purpose remains meaningful, or
-
-   b) under the GNU GPL, with none of the additional permissions of
-   this License applicable to that copy.
-
-  3. Object Code Incorporating Material from Library Header Files.
-
-  The object code form of an Application may incorporate material from
-a header file that is part of the Library.  You may convey such object
-code under terms of your choice, provided that, if the incorporated
-material is not limited to numerical parameters, data structure
-layouts and accessors, or small macros, inline functions and templates
-(ten or fewer lines in length), you do both of the following:
-
-   a) Give prominent notice with each copy of the object code that the
-   Library is used in it and that the Library and its use are
-   covered by this License.
-
-   b) Accompany the object code with a copy of the GNU GPL and this license
-   document.
-
-  4. Combined Works.
-
-  You may convey a Combined Work under terms of your choice that,
-taken together, effectively do not restrict modification of the
-portions of the Library contained in the Combined Work and reverse
-engineering for debugging such modifications, if you also do each of
-the following:
-
-   a) Give prominent notice with each copy of the Combined Work that
-   the Library is used in it and that the Library and its use are
-   covered by this License.
-
-   b) Accompany the Combined Work with a copy of the GNU GPL and this license
-   document.
-
-   c) For a Combined Work that displays copyright notices during
-   execution, include the copyright notice for the Library among
-   these notices, as well as a reference directing the user to the
-   copies of the GNU GPL and this license document.
-
-   d) Do one of the following:
-
-       0) Convey the Minimal Corresponding Source under the terms of this
-       License, and the Corresponding Application Code in a form
-       suitable for, and under terms that permit, the user to
-       recombine or relink the Application with a modified version of
-       the Linked Version to produce a modified Combined Work, in the
-       manner specified by section 6 of the GNU GPL for conveying
-       Corresponding Source.
-
-       1) Use a suitable shared library mechanism for linking with the
-       Library.  A suitable mechanism is one that (a) uses at run time
-       a copy of the Library already present on the user's computer
-       system, and (b) will operate properly with a modified version
-       of the Library that is interface-compatible with the Linked
-       Version.
-
-   e) Provide Installation Information, but only if you would otherwise
-   be required to provide such information under section 6 of the
-   GNU GPL, and only to the extent that such information is
-   necessary to install and execute a modified version of the
-   Combined Work produced by recombining or relinking the
-   Application with a modified version of the Linked Version. (If
-   you use option 4d0, the Installation Information must accompany
-   the Minimal Corresponding Source and Corresponding Application
-   Code. If you use option 4d1, you must provide the Installation
-   Information in the manner specified by section 6 of the GNU GPL
-   for conveying Corresponding Source.)
-
-  5. Combined Libraries.
-
-  You may place library facilities that are a work based on the
-Library side by side in a single library together with other library
-facilities that are not Applications and are not covered by this
-License, and convey such a combined library under terms of your
-choice, if you do both of the following:
-
-   a) Accompany the combined library with a copy of the same work based
-   on the Library, uncombined with any other library facilities,
-   conveyed under the terms of this License.
-
-   b) Give prominent notice with the combined library that part of it
-   is a work based on the Library, and explaining where to find the
-   accompanying uncombined form of the same work.
-
-  6. Revised Versions of the GNU Lesser General Public License.
-
-  The Free Software Foundation may publish revised and/or new versions
-of the GNU Lesser General Public License from time to time. Such new
-versions will be similar in spirit to the present version, but may
-differ in detail to address new problems or concerns.
-
-  Each version is given a distinguishing version number. If the
-Library as you received it specifies that a certain numbered version
-of the GNU Lesser General Public License "or any later version"
-applies to it, you have the option of following the terms and
-conditions either of that published version or of any later version
-published by the Free Software Foundation. If the Library as you
-received it does not specify a version number of the GNU Lesser
-General Public License, you may choose any version of the GNU Lesser
-General Public License ever published by the Free Software Foundation.
-
-  If the Library as you received it specifies that a proxy can decide
-whether future versions of the GNU Lesser General Public License shall
-apply, that proxy's public statement of acceptance of any version is
-permanent authorization for you to choose that version for the
-Library.

lib/tinyNeoPixel_Static/tinyNeoPixel_Static.h

@@ -1,327 +0,0 @@
-/*--------------------------------------------------------------------
-  This file is part of the tinyNeoPixel library, derived from
-  Adafruit_NeoPixel.
-
-  NeoPixel is free software: you can redistribute it and/or modify
-  it under the terms of the GNU Lesser General Public License as
-  published by the Free Software Foundation, either version 3 of
-  the License, or (at your option) any later version.
-
-  NeoPixel is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with NeoPixel.  If not, see
-  <http://www.gnu.org/licenses/>.
-  --------------------------------------------------------------------*/
-// *INDENT-OFF* astyle hates this file
-// *PAD-OFF* and destroys the lookup tables!
-
-#ifndef TINYNEOPIXEL_H
-#define TINYNEOPIXEL_H
-
-#include <Arduino.h>
-
-#if (__AVR_ARCH__ < 100)
-  #error "This version of the library only supports AVRxt parts (tinyAVR 0/1/2-series, megaAVR 0-series and the AVR DA/DB/DD parts. For tinyNeoPixel, for classic AVR, get from ATTinyCore package"
-#endif
-
-// The order of primary colors in the NeoPixel data stream can vary
-// among device types, manufacturers and even different revisions of
-// the same item.  The third parameter to the Adafruit_NeoPixel
-// constructor encodes the per-pixel byte offsets of the red, green
-// and blue primaries (plus white, if present) in the data stream --
-// the following #defines provide an easier-to-use named version for
-// each permutation.  e.g. NEO_GRB indicates a NeoPixel-compatible
-// device expecting three bytes per pixel, with the first byte
-// containing the green value, second containing red and third
-// containing blue.  The in-memory representation of a chain of
-// NeoPixels is the same as the data-stream order; no re-ordering of
-// bytes is required when issuing data to the chain.
-
-// Bits 5,4 of this value are the offset (0-3) from the first byte of
-// a pixel to the location of the red color byte.  Bits 3,2 are the
-// green offset and 1,0 are the blue offset.  If it is an RGBW-type
-// device (supporting a white primary in addition to R,G,B), bits 7,6
-// are the offset to the white byte...otherwise, bits 7,6 are set to
-// the same value as 5,4 (red) to indicate an RGB (not RGBW) device.
-// i.e. binary representation:
-// 0bWWRRGGBB for RGBW devices
-// 0bRRRRGGBB for RGB
-
-// RGB NeoPixel permutations; white and red offsets are always same
-// Offset:         W          R          G          B
-#define NEO_RGB  ((0 << 6) | (0 << 4) | (1 << 2) | (2))
-#define NEO_RBG  ((0 << 6) | (0 << 4) | (2 << 2) | (1))
-#define NEO_GRB  ((1 << 6) | (1 << 4) | (0 << 2) | (2))
-#define NEO_GBR  ((2 << 6) | (2 << 4) | (0 << 2) | (1))
-#define NEO_BRG  ((1 << 6) | (1 << 4) | (2 << 2) | (0))
-#define NEO_BGR  ((2 << 6) | (2 << 4) | (1 << 2) | (0))
-
-// RGBW NeoPixel permutations; all 4 offsets are distinct
-// Offset:         W          R          G          B
-#define NEO_WRGB ((0 << 6) | (1 << 4) | (2 << 2) | (3))
-#define NEO_WRBG ((0 << 6) | (1 << 4) | (3 << 2) | (2))
-#define NEO_WGRB ((0 << 6) | (2 << 4) | (1 << 2) | (3))
-#define NEO_WGBR ((0 << 6) | (3 << 4) | (1 << 2) | (2))
-#define NEO_WBRG ((0 << 6) | (2 << 4) | (3 << 2) | (1))
-#define NEO_WBGR ((0 << 6) | (3 << 4) | (2 << 2) | (1))
-
-#define NEO_RWGB ((1 << 6) | (0 << 4) | (2 << 2) | (3))
-#define NEO_RWBG ((1 << 6) | (0 << 4) | (3 << 2) | (2))
-#define NEO_RGWB ((2 << 6) | (0 << 4) | (1 << 2) | (3))
-#define NEO_RGBW ((3 << 6) | (0 << 4) | (1 << 2) | (2))
-#define NEO_RBWG ((2 << 6) | (0 << 4) | (3 << 2) | (1))
-#define NEO_RBGW ((3 << 6) | (0 << 4) | (2 << 2) | (1))
-
-#define NEO_GWRB ((1 << 6) | (2 << 4) | (0 << 2) | (3))
-#define NEO_GWBR ((1 << 6) | (3 << 4) | (0 << 2) | (2))
-#define NEO_GRWB ((2 << 6) | (1 << 4) | (0 << 2) | (3))
-#define NEO_GRBW ((3 << 6) | (1 << 4) | (0 << 2) | (2))
-#define NEO_GBWR ((2 << 6) | (3 << 4) | (0 << 2) | (1))
-#define NEO_GBRW ((3 << 6) | (2 << 4) | (0 << 2) | (1))
-
-#define NEO_BWRG ((1 << 6) | (2 << 4) | (3 << 2) | (0))
-#define NEO_BWGR ((1 << 6) | (3 << 4) | (2 << 2) | (0))
-#define NEO_BRWG ((2 << 6) | (1 << 4) | (3 << 2) | (0))
-#define NEO_BRGW ((3 << 6) | (1 << 4) | (2 << 2) | (0))
-#define NEO_BGWR ((2 << 6) | (3 << 4) | (1 << 2) | (0))
-#define NEO_BGRW ((3 << 6) | (2 << 4) | (1 << 2) | (0))
-
-#define NEO_KHZ800 0x0000 ///< 800 KHz data transmission
-
-// 400 kHz neopixels are virtually absent from the market today
-// They are not supported.
-
-// These two tables are declared outside the Adafruit_NeoPixel class
-// because some boards may require oldschool compilers that don't
-// handle the C++11 constexpr keyword.
-
-/* A pre-calculated 8-bit sine look-up table stored in flash for use
-with the sine8() function. This is apparently of use in some animation
-algorithms. If __AVR_ARCH__==103, then all of the flash is memory
-mapped, and we can simply declare it const, access it like a
-normal variable, and it won't be copied to RAM.
-
-AVRxt devices with too much flash for all of it to be mapped
-which includes the AVR64Dx and AVR128Dx parts. DxCore defines a
-.section for the area of PROGMEM that is mapped by default, and
-a MAPPED_PROGMEM macro. A variable declared const MAPPED_PROGMEM can
-be accessed normally, but will be stored in the flash and not copied to RAM.
-
-Finally, if neither of those are an option - it gets declared with PROGMEM
-
-
-   Copy & paste this snippet into a Python REPL to regenerate:
-import math
-for x in range(256):
-    print("{:3},".format(int((math.sin(x/128.0*math.pi)+1.0)*127.5+0.5))),
-    if x&15 == 15: print
-*/
-#if (__AVR_ARCH__==103)
-  // All out flash is mapped - yay!
-  static const uint8_t _NeoPixelSineTable[256] = {
-#elif defined(MAPPED_PROGMEM)
-  // Some of it is - but we can put stuff there - yay!
-  static const uint8_t MAPPED_PROGMEM _NeoPixelSineTable[256] = {
-#else
-  // Back to progmem...
-  static const uint8_t PROGMEM _NeoPixelSineTable[256] = {
-#endif
-  128,131,134,137,140,143,146,149,152,155,158,162,165,167,170,173,
-  176,179,182,185,188,190,193,196,198,201,203,206,208,211,213,215,
-  218,220,222,224,226,228,230,232,234,235,237,238,240,241,243,244,
-  245,246,248,249,250,250,251,252,253,253,254,254,254,255,255,255,
-  255,255,255,255,254,254,254,253,253,252,251,250,250,249,248,246,
-  245,244,243,241,240,238,237,235,234,232,230,228,226,224,222,220,
-  218,215,213,211,208,206,203,201,198,196,193,190,188,185,182,179,
-  176,173,170,167,165,162,158,155,152,149,146,143,140,137,134,131,
-  128,124,121,118,115,112,109,106,103,100, 97, 93, 90, 88, 85, 82,
-   79, 76, 73, 70, 67, 65, 62, 59, 57, 54, 52, 49, 47, 44, 42, 40,
-   37, 35, 33, 31, 29, 27, 25, 23, 21, 20, 18, 17, 15, 14, 12, 11,
-   10,  9,  7,  6,  5,  5,  4,  3,  2,  2,  1,  1,  1,  0,  0,  0,
-    0,  0,  0,  0,  1,  1,  1,  2,  2,  3,  4,  5,  5,  6,  7,  9,
-   10, 11, 12, 14, 15, 17, 18, 20, 21, 23, 25, 27, 29, 31, 33, 35,
-   37, 40, 42, 44, 47, 49, 52, 54, 57, 59, 62, 65, 67, 70, 73, 76,
-   79, 82, 85, 88, 90, 93, 97,100,103,106,109,112,115,118,121,124};
-
-/* Similar to above, but for an 8-bit gamma-correction table.
-   Copy & paste this snippet into a Python REPL to regenerate:
-import math
-gamma=2.6
-for x in range(256):
-    print("{:3},".format(int(math.pow((x)/255.0,gamma)*255.0+0.5))),
-    if x&15 == 15: print
-*/
-#if (__AVR_ARCH__==103)
-  // All our flash is mapped - yay!
-  static const uint8_t _NeoPixelGammaTable[256] = {
-#elif defined(MAPPED_PROGMEM)
-  // Some of it is - but we can put stuff there - yay!
-  static const uint8_t MAPPED_PROGMEM _NeoPixelGammaTable[256] = {
-#else
-  // Back to progmem...
-  static const uint8_t PROGMEM _NeoPixelGammaTable[256] = {
-#endif
-    0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
-    0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1,  1,  1,  1,
-    1,  1,  1,  1,  2,  2,  2,  2,  2,  2,  2,  2,  3,  3,  3,  3,
-    3,  3,  4,  4,  4,  4,  5,  5,  5,  5,  5,  6,  6,  6,  6,  7,
-    7,  7,  8,  8,  8,  9,  9,  9, 10, 10, 10, 11, 11, 11, 12, 12,
-   13, 13, 13, 14, 14, 15, 15, 16, 16, 17, 17, 18, 18, 19, 19, 20,
-   20, 21, 21, 22, 22, 23, 24, 24, 25, 25, 26, 27, 27, 28, 29, 29,
-   30, 31, 31, 32, 33, 34, 34, 35, 36, 37, 38, 38, 39, 40, 41, 42,
-   42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57,
-   58, 59, 60, 61, 62, 63, 64, 65, 66, 68, 69, 70, 71, 72, 73, 75,
-   76, 77, 78, 80, 81, 82, 84, 85, 86, 88, 89, 90, 92, 93, 94, 96,
-   97, 99,100,102,103,105,106,108,109,111,112,114,115,117,119,120,
-  122,124,125,127,129,130,132,134,136,137,139,141,143,145,146,148,
-  150,152,154,156,158,160,162,164,166,168,170,172,174,176,178,180,
-  182,184,186,188,191,193,195,197,199,202,204,206,209,211,213,215,
-  218,220,223,225,227,230,232,235,237,240,242,245,247,250,252,255};
-
-
-typedef uint8_t  neoPixelType;
-
-class tinyNeoPixel {
-
-  public:
-
-    // Constructor: number of LEDs, pin number, LED type
-    tinyNeoPixel(uint16_t n, uint8_t p, neoPixelType t, uint8_t *pxl);
-    ~tinyNeoPixel();
-
- void
-    show(void),
-    setPin(uint8_t p),
-    setPixelColor(uint16_t n, uint8_t r, uint8_t g, uint8_t b),
-    setPixelColor(uint16_t n, uint8_t r, uint8_t g, uint8_t b, uint8_t w),
-    setPixelColor(uint16_t n, uint32_t c),
-    fill(uint32_t c=0, uint16_t first=0, uint16_t count=0),
-    setBrightness(uint8_t b),
-    clear();
-  uint8_t
-   *getPixels(void) const,
-    getBrightness(void) const;
-  uint16_t
-    numPixels(void) const;
-  uint32_t
-    getPixelColor(uint16_t n) const;
-  uint8_t getPin(void) { return pin; }
-  void begin(void) {return;}
-  /*!
-    @brief   An 8-bit integer sine wave function, not directly compatible
-             with standard trigonometric units like radians or degrees.
-    @param   x  Input angle, 0-255; 256 would loop back to zero, completing
-                the circle (equivalent to 360 degrees or 2 pi radians).
-                One can therefore use an unsigned 8-bit variable and simply
-                add or subtract, allowing it to overflow/underflow and it
-                still does the expected contiguous thing.
-    @return  Sine result, 0 to 255, or -128 to +127 if type-converted to
-             a signed int8_t, but you'll most likely want unsigned as this
-             output is often used for pixel brightness in animation effects.
-  */
-  static uint8_t    sine8(uint8_t x) { // 0-255 in, 0-255 out
-    #if (__AVR_ARCH__==103 || defined(MAPPED_PROGMEM))
-      return _NeoPixelSineTable[x];
-    #else     // We had to put it in PROGMEM, and that's how we get it out
-      return pgm_read_byte(&_NeoPixelSineTable[x]); // 0-255 in, 0-255 out
-    #endif
-  }
-
-  /*!
-    @brief   An 8-bit gamma-correction function for basic pixel brightness
-             adjustment. Makes color transitions appear more perceptially
-             correct.
-    @param   x  Input brightness, 0 (minimum or off/black) to 255 (maximum).
-    @return  Gamma-adjusted brightness, can then be passed to one of the
-             setPixelColor() functions. This uses a fixed gamma correction
-             exponent of 2.6, which seems reasonably okay for average
-             NeoPixels in average tasks. If you need finer control you'll
-             need to provide your own gamma-correction function instead.
-  */
-
-  static uint8_t    gamma8(uint8_t x) {
-    #if (__AVR_ARCH__==103 || defined(MAPPED_PROGMEM))
-      return _NeoPixelGammaTable[x];
-    #else
-      return pgm_read_byte(&_NeoPixelGammaTable[x]);
-    #endif
-  }
-  /*!
-    @brief   Convert separate red, green and blue values into a single
-             "packed" 32-bit RGB color.
-    @param   r  Red brightness, 0 to 255.
-    @param   g  Green brightness, 0 to 255.
-    @param   b  Blue brightness, 0 to 255.
-    @return  32-bit packed RGB value, which can then be assigned to a
-             variable for later use or passed to the setPixelColor()
-             function. Packed RGB format is predictable, regardless of
-             LED strand color order.
-  */
-  static uint32_t   Color(uint8_t r, uint8_t g, uint8_t b) {
-    return ((uint32_t)r << 16) | ((uint32_t)g <<  8) | b;
-  }
-  /*!
-    @brief   Convert separate red, green, blue and white values into a
-             single "packed" 32-bit WRGB color.
-    @param   r  Red brightness, 0 to 255.
-    @param   g  Green brightness, 0 to 255.
-    @param   b  Blue brightness, 0 to 255.
-    @param   w  White brightness, 0 to 255.
-    @return  32-bit packed WRGB value, which can then be assigned to a
-             variable for later use or passed to the setPixelColor()
-             function. Packed WRGB format is predictable, regardless of
-             LED strand color order.
-  */
-  static uint32_t   Color(uint8_t r, uint8_t g, uint8_t b, uint8_t w) {
-    return ((uint32_t)w << 24) | ((uint32_t)r << 16) | ((uint32_t)g <<  8) | b;
-  }
-  static uint32_t   ColorHSV(uint16_t hue, uint8_t sat=255, uint8_t val=255);
-  /*!
-    @brief   A gamma-correction function for 32-bit packed RGB or WRGB
-             colors. Makes color transitions appear more perceptially
-             correct.
-    @param   x  32-bit packed RGB or WRGB color.
-    @return  Gamma-adjusted packed color, can then be passed in one of the
-             setPixelColor() functions. Like gamma8(), this uses a fixed
-             gamma correction exponent of 2.6, which seems reasonably okay
-             for average NeoPixels in average tasks. If you need finer
-             control you'll need to provide your own gamma-correction
-             function instead.
-  */
-  static uint32_t gamma32(uint32_t x);
-
-  #if (!defined(DISABLEMILLIS) && !defined(MILLIS_USE_TIMERRTC) && !defined(MILLIS_USE_TIMERRTC_XTAL) && !defined(MILLIS_USE_TIMERRTC_XOSC))
-    inline bool canShow(void) { return (micros() - endTime) >= 50L; }
-  #else
-    inline bool canShow(void) {return 1;} //we don't have micros here;
-  #endif
-
-
- private:
-
-  uint16_t
-    numLEDs,       // Number of RGB LEDs in strip
-    numBytes;      // Size of 'pixels' buffer below (3 or 4 bytes/pixel)
-  int8_t
-    pin;           // Output pin number (-1 if not yet set)
-  uint8_t
-    brightness,
-   *pixels,        // Holds LED color values (3 or 4 bytes each)
-    rOffset,       // Index of red byte within each 3- or 4-byte pixel
-    gOffset,       // Index of green byte
-    bOffset,       // Index of blue byte
-    wOffset;       // Index of white byte (same as rOffset if no white)
-  uint32_t
-    endTime;       // Latch timing reference
-  volatile uint8_t
-    *port;         // Output PORT register
-  uint8_t
-    pinMask;       // Output PORT bitmask
-
-};
-
-#endif // TINYNEOPIXEL_H

platformio.ini

@@ -13,17 +13,15 @@ platform = atmelmegaavr
 board = ATtiny3216
 framework = arduino
 
-## Board Config ##
-# You might want to set f_cpu to 5MHz (5000000L) to allow operation at lower Battery Voltage - Use "Burn Fuses" after changing f_cpu
-# Be aware that some Functions (like WS2812B LED Support) will not work at 5 HMz
-board_build.f_cpu = 8000000L 
+# Board Config
+board_build.f_cpu = 5000000L
 board_hardware.oscillator = internal
 board_hardware.bod = disabled
 
-## Debug Port Config ##
+# Debug Port Config
 monitor_speed = 115200
 
-## LMIC Config via Build Flags ##
+# LMIC Config via Build Flags
 build_flags =
     -D CFG_eu868
     -D CFG_sx1276_radio
@@ -31,7 +29,7 @@ build_flags =
     -D DISABLE_BEACONS
     -D ARDUINO_LMIC_PROJECT_CONFIG_H_SUPPRESS
 
-## Programmer Config (MicroUPDI) ##
+# Programmer Config (MicroUPDI)
 upload_port = usb
 upload_protocol = xplainedmini_updi
 upload_flags =
@@ -39,6 +37,5 @@ upload_flags =
     -P$UPLOAD_PORT
     -c$UPLOAD_PROTOCOL
 
-## External Libraries ##
 lib_deps = 
   mcci-catena/MCCI LoRaWAN LMIC library @ ^3.3.0

src/config.h.example

@@ -4,15 +4,6 @@
 // ATTNode v3 Onboard LED is on PIN_PA7
 #define LED_PIN PIN_PA7
 
-// Enable WS2812B RGB LED Support for the CO2 Addon Board
-// * First LED shows CO2-Level (green: <1000, yellow: 1000-1800, red: >=1800)
-// * Second LED shows LoRa Status (yellow: Joining, green 1s: Joined, green 100ms: Sending, blue 250ms: Received Downlink) 
-// WS2812B_BRIGHT can be set to the desired brightness value for the LEDs (0=off, 255=brightest)
-// Uncomment the 3 following lines to get the default behaviour
-// #define WS2812B_PIN PIN_PC1
-// #define WS2812B_NUM 2
-// #define WS2812B_BRIGHT 32
-
 // Enable Serial Debugging. Parameters for the Serial Port are 115200
 // Please be aware that the SG112A/B CO2 Sensor uses the HW-UART, so
 // Serial Debug Output is not available with this Sensor.

src/main.cpp

@@ -31,20 +31,6 @@ void blink(uint8_t num) {
 #define BLINK_LED(COUNT)
 #endif
 
-// WS2812B RGB LEDs on the CO2 Addon Board
-// Defines the  Macro Function WS2812B_SETLED so we don't need #ifdefs everywhere
-#ifdef WS2812B_PIN
-  #include <tinyNeoPixel_Static.h>
-  byte pixels[WS2812B_NUM * 3];
-  tinyNeoPixel leds = tinyNeoPixel(WS2812B_NUM, WS2812B_PIN, NEO_GRB, pixels);
-  #define WS2812B_SETLED(led,r,g,b) leds.setPixelColor(led,r,g,b); leds.show()
-  #define WS2812B_BLINK(led,r,g,b,ms) leds.setPixelColor(led,r,g,b); leds.show(); delay(ms); leds.setPixelColor(led,0,0,0); leds.show()
-#else
-  #define WS2812B_SETLED(led,r,g,b)
-  #define WS2812B_BLINK(led,r,g,b,ms)
-#endif
-
-// Create the Sensor Objects
 #if defined HAS_NO_SENSOR
   struct lora_data {
     uint8_t bat;
@@ -123,13 +109,12 @@ void onEvent(ev_t ev) {
     case EV_JOINED:
       // Disable LinkCheck
       LMIC_setLinkCheckMode(0);
-      WS2812B_BLINK(1,0,127,0,1000);
+      BLINK_LED(2);
       DEBUG_PRINTLN("OTAA Join Succeeded");
       break;
     case EV_TXCOMPLETE:
       // Check for Downlink
       DEBUG_PRINTLN("LoRa Packet Sent");
-      WS2812B_BLINK(1,0,127,0,1000);
       if ((int)LMIC.dataLen == 2) {
         // We got a Packet with the right size - lets assemble it into a uint16_t
         DEBUG_PRINTLN("Received Downlink")
@@ -138,7 +123,6 @@ void onEvent(ev_t ev) {
         DEBUG_PRINTLN(tmpslp);
         sleep_time = tmpslp;
         EEPROM.put(ADDR_SLP, tmpslp);
-        WS2812B_BLINK(1,0,0,127,250);
       }
 
       // Got to sleep for specified Time
@@ -185,31 +169,11 @@ void do_send(osjob_t* j) {
     // Get Sensor Readings Into Data Paket
     #ifndef HAS_NO_SENSOR
     sensor.getSensorData(data);
+    #endif
 
     // Queue Packet for Sending
     DEBUG_PRINTLN("LoRa-Packet Queued");
     LMIC_setTxData2(1, (unsigned char *)&data, sizeof(data), 0);
-
-    #if defined WS2812B_PIN && (defined HAS_SG112A || defined HAS_MHZ19C)
-
-    // CO2 PPM Levels and LED Colors
-    // < 1000 ppm green
-    // < 1800 ppm yellow
-    // > 1000 ppm red
-
-    if (data.ppm > 0 && data.ppm <= 1000) {
-      WS2812B_SETLED(0,0,127,0);
-    } else if (data.ppm > 1000 && data.ppm <= 1800) {
-      WS2812B_SETLED(0,127,127,0);
-    } else if (data.ppm > 1800) {
-      WS2812B_SETLED(0,127,0,0);
-    } else {
-      WS2812B_SETLED(0,0,0,0);
-    }
-    #endif // WS2812B
-    #endif // #infdef HAS_NO_SENSOR
-
-
   }
 }
 
@@ -226,11 +190,6 @@ void setup()
   for (int i = 0; i < (sizeof(disabledPins) / sizeof(disabledPins[0])) - 1; i++)
     pinMode(disabledPins[i], INPUT_PULLUP);
 
-  #ifdef WS2812B_PIN
-    pinMode(WS2812B_PIN, OUTPUT);
-    leds.setBrightness(WS2812B_BRIGHT);
-  #endif
-
   // Set RTC
   while (RTC.STATUS > 0) {}
   RTC.CLKSEL = RTC_CLKSEL_INT1K_gc;
@@ -266,7 +225,6 @@ void setup()
   DEBUG_PRINTLN("Setup Finished");
   
   // Schedule First Send (Triggers OTAA Join as well)
-  WS2812B_SETLED(1,127,127,0);
   do_send(&sendjob);
 }