SPS30 Initial Implementation

This commit is contained in:
seiichiro 2021-07-06 18:02:36 +02:00
parent 1e80e089d3
commit 759a500888
5 changed files with 230 additions and 0 deletions

147
lib/SPS30/SPS30.cpp Normal file
View file

@ -0,0 +1,147 @@
/*
.cpp - SPS30 Sensor Library
Copyright (c) 2020-2021, Stefan Brand
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <Arduino.h>
#include "SPS30.h"
SPS30::SPS30() {
}
uint8_t SPS30::getSensorData(char *payload, uint8_t startbyte) {
uint8_t data[30];
for (uint8_t i = 0; i < 30; i++)
data[i] = 0xFF;
uint16_t massPM1, massPM25, massPM4, massPM10, typPM;
// Start Measuring, Integer Output
write(SPS30_START_MEASUREMENT, 0x0500);
// Wait for Stable Values (max 30s according to datasheet)
delay(30000);
if (hasData()) {
write(SPS30_READ_MEASUREMENT);
Wire.requestFrom(SPS30_I2C_ADDRESS, 30);
if (Wire.available() != 0) {
Wire.readBytes(data, 30);
for (uint8_t i = 0; i < 30; i++)
data[i] = 0xFE;
// PM1.0
if (data[3] == calcCRC(data, 2))
massPM1 = data[0] << 8 | data[1];
// PM2.5
if (data[5] == calcCRC(data+3, 2))
massPM25 = data[3] << 8 | data[4];
// PM4
if (data[8] == calcCRC(data+6, 2))
massPM4 = data[6] << 8 | data[7];
// PM10
if (data[11] == calcCRC(data+9, 2))
massPM10 = data[9] << 8 | data[10];
// Typical Size
if (data[29] == calcCRC(data+27, 2))
typPM = data[27] << 8 | data[28];
}
}
write(SPS30_STOP_MEASUREMENT);
uint16ToPayload(massPM1, payload, startbyte);
uint16ToPayload(massPM25, payload, startbyte+2);
uint16ToPayload(massPM4, payload, startbyte+4);
uint16ToPayload(massPM10, payload, startbyte+6);
uint16ToPayload(typPM, payload, startbyte+8);
}
// Check if Sensor has Data
bool SPS30::hasData(void) {
uint16_t resp = readReg(SPS30_GET_DATA_READY);
return (resp == 1);
}
// Read a 16Bit Register
uint16_t SPS30::readReg(uint16_t regAddr) {
Wire.beginTransmission(SPS30_I2C_ADDRESS);
Wire.write(regAddr >> 8);
Wire.write(regAddr & 0xFF);
Wire.endTransmission();
Wire.requestFrom(SPS30_I2C_ADDRESS, 2);
if (Wire.available() != 0) {
uint8_t msb = Wire.read();
uint8_t lsb = Wire.read();
return ((uint16_t)msb << 8 | lsb);
}
return(0);
}
bool SPS30::write(uint16_t cmd) {
Wire.beginTransmission(SPS30_I2C_ADDRESS);
Wire.write(cmd >> 8);
Wire.write(cmd & 0xFF);
if (Wire.endTransmission() != 0)
return(false);
return(true);
}
bool SPS30::write(uint16_t cmd, uint16_t arg){
uint8_t crcdata[2];
crcdata[0] = arg >> 8;
crcdata[1] = arg & 0xFF;
uint8_t csum = calcCRC(crcdata, 2);
Wire.beginTransmission(SPS30_I2C_ADDRESS);
Wire.write(cmd >> 8);
Wire.write(cmd & 0xFF);
Wire.write(arg >> 8);
Wire.write(arg & 0xFF);
Wire.write(csum);
if (Wire.endTransmission() != 0)
return(false);
return(true);
}
// Calculate the Checksum
uint8_t SPS30::calcCRC(uint8_t data[], uint8_t len) {
uint8_t csum = 0xFF;
for (uint8_t x = 0; x < len; x++)
{
csum ^= data[x];
for (uint8_t i = 0; i < 8; i++)
{
if ((csum & 0x80) != 0)
csum = (uint8_t)((csum << 1) ^ 0x31);
else
csum <<= 1;
}
}
return csum;
}

64
lib/SPS30/SPS30.h Normal file
View file

@ -0,0 +1,64 @@
/*
SPS30.h - SPS30 Sensor Library
Copyright (c) 2020-2021, Stefan Brand
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef SPS30_H
#define SPS30_H
#include <Wire.h>
#include "../../include/attsensor.h"
#include "../../include/debug.h"
// I2C Address
#define SPS30_I2C_ADDRESS 0x69
// I2C Commands and Registers
#define SPS30_START_MEASUREMENT 0x0010
#define SPS30_STOP_MEASUREMENT 0x0104
#define SPS30_GET_DATA_READY 0x0202
#define SPS30_READ_MEASUREMENT 0x0300
#define SPS30_AUTO_CLEAN_INTERVAL 0x8004
#define SPS30_START_FAN_CLEANING 0x5607
#define SPS30_READ_ARTICLE_CODE 0xD025
#define SPS30_READ_SERIAL_NUMBER 0xD033
#define SPS30_DEVICE_RESET 0xD304
class SPS30 : public AttSensor {
private:
bool hasData(void);
uint8_t calcCRC(uint8_t data[], uint8_t len);
uint16_t readReg(uint16_t regAddr);
bool write(uint16_t cmd);
bool write(uint16_t cmd, uint16_t arg);
public:
SPS30();
uint8_t getSensorData(char *payload, uint8_t startbyte);
void calibrate(void) {};
void initialize(void) {};
uint8_t numBytes(void) { return 10; };
};
#endif

View file

@ -69,6 +69,10 @@
<input type="checkbox" value="sht21" onchange="updateDecoder();">
SHT21
</label>
<label>
<input type="checkbox" value="sps30" onchange="updateDecoder();">
SPS30
</label>
<label>
<input type="checkbox" value="hm330x" onchange="updateDecoder();">
HM330x
@ -113,6 +117,13 @@
{ "name": "temperature", "type": "Int32", "factor": 100, "multi": false },
{ "name": "humidity", "type": "Int32", "factor": 100, "multi": false },
],
"sps30": [
{ "name": "pm1", "type": "UInt16", "factor": 1, "multi": false },
{ "name": "pm2_5", "type": "UInt16", "factor": 1, "multi": false },
{ "name": "pm4", "type": "UInt16", "factor": 1, "multi": false },
{ "name": "pm10", "type": "UInt16", "factor": 1, "multi": false },
{ "name": "typPMsize", "type": "UInt16", "factor": 1, "multi": false },
],
"hm330x": [
{ "name": "pm1", "type": "UInt16", "factor": 1, "multi": false },
{ "name": "pm2_5", "type": "UInt16", "factor": 1, "multi": false },

View file

@ -59,6 +59,7 @@
// #define HAS_SCD30
// #define HAS_BME280
// #define HAS_SHT21
// #define HAS_SPS30
// #define HAS_HM330x
// #define HAS_BRIGHTNESS
// #define HAS_DS18B20

View file

@ -36,6 +36,9 @@
#ifdef HAS_SHT21
#include <SHT21.h>
#endif
#ifdef HAS_SPS30
#include <SPS30.h>
#endif
#ifdef HAS_HM330x
#include <HM330x.h>
#endif
@ -368,6 +371,10 @@ void setup()
sensors[i] = new SHT21();
i++;
#endif
#ifdef HAS_SPS30
sensors[i] = new SPS30();
i++;
#endif
#ifdef HAS_HM330x
sensors[i] = new HM330x(HM330x_SLEEP_PIN);
i++;