A TTNMapper based on the ATTNode v3

Find a file

Stefan Brand c08d2aac8e Add Current Case STLs		2021-07-15 18:20:46 +02:00
.vscode	Initial Prototype Firmware	2021-05-15 19:47:57 +02:00
case	Add Current Case STLs	2021-07-15 18:20:46 +02:00
include	Initial Prototype Firmware	2021-05-15 19:47:57 +02:00
lib	Fix SatsInView	2021-06-20 18:35:13 +02:00
src	Fill Display Lines to Avoid Artifacts	2021-06-20 18:42:26 +02:00
.gitignore	Initial Prototype Firmware	2021-05-15 19:47:57 +02:00
platformio.ini	Initial Prototype Firmware	2021-05-15 19:47:57 +02:00
README.md	Update Readme Regarding Setup	2021-06-20 12:45:54 +02:00

README.md

ATTMapper (WIP)

A TTN Mapper based on the ATTNode v3.

Everything in this repository is work in progress, use at your own risk!

Hardware

Attnode v3 with PCB-Edge SMA Antenna Mount
Powerpack, LiPo Cell (500mA), LiPo Charger Board (You can use any 3,3V Power Source)
NEO M8N GPS Breakout (Any 3.3V-Capable Module which is NMEA-Compatible should work)
SSD1306 128x64 OLED-Display
Button

Connections

Connect the AttNode and Modules as follows:

GPS

ATTNode	Module
Vin	VCC
GND	GND
Tx	RX
Rx	TX

OLED

ATTNode	Module
Vin	VCC
GND	GND
SDA	SDA
SCL	SCL

Button

The Button has to be Connected between PC2 and GND on the ATTNode

Software

This repository contains the PlatformIO project with the mapper firmware. Copy config.example.h to config.h and insert your keys and DeviceID from TTN. Compile and upload as normal (See AttNode v3 dokumentation for details).

Usage

If a Button is connected you can use the following functions:

Short press: Schedule an imideate send, regardless of interval | In Setup Mode - cycle through Settings or Change Activated Setting
Long Press (>1s): Enter Setup Mode, Activate a Setting in Setup Mode

In Setup Mode a '>' in front of a Line identifies the selected option, a '>>' identifies an activated setting (can be changed by short press). Use long press to deactivate an activated setting

License

Unless stated otherwise, everything in this repository is under the BSD 3-Clause License as follows:

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.