use <libRoundedcube.scad>;
use <gopro_mounts.scad>;

$boardw=30.4;
$boardh=37.3;
$oledw=27.62;
$oledh=27.80;
$gpsh=20.4;
$gpsw=6.25;
$walls=1.6;
$fn=100;

$oledside=($boardw-$oledw)/2;

module front() {
  difference() {
    union() {
      roundedcube([$boardh+($walls*4)+10, $boardw+($walls*4), $walls+8], false, 2, "zmax", $fn=100);
      difference() {
        translate([$walls-1,$walls-1.05, -5]) roundedcube([$boardh+($walls*2)+12,$boardw+($walls*2)+2+0.1,5], false, 2, "zmin", $fn=100);
        translate([$walls,$walls-0.125, -5.1]) cube([$boardh+($walls*2)+10,$boardw+($walls*2)+0.25,5.1]);
      }
    }
    translate([$walls,$walls-0.125, -0.1]) cube([$boardh+($walls*2)+0.1,$boardw+($walls*2)+0.25,6]);
    translate([$walls,$walls+2, -0.1]) cube([$boardh+($walls*2)+10,$boardw+($walls*2)-4,6]);
    translate([($walls*2)+4.6,($walls*2)+$oledside,-0.1]) cube([$oledh-6,$oledw, 8]);
    translate([($walls*2)+10.6,($walls*2)+$oledside,-0.1]) cube([$oledh-13.5,$oledw, 10]);
    translate([($walls*2)+1.6,($walls*2)+$oledside+3,-0.1]) cube([$oledh,$oledw-6, 8]);
    translate([-0.1,$walls+$boardw-9.2,-5.36]) cube([3,8.5,9.6]);
    translate([-0.1,($walls*2)+9,-2.6]) rotate([0,90,0]) cylinder(5, 2.85, 2.85, $fn=100);
    translate([-0.5,($walls*2)+9-2.85,-2.6]) rotate([0,90,0]) cube([6, 2.85*2, 5]);
    translate([$boardh+($walls*4)+5,($boardw+($walls*4))/2,3]) rotate([0,90,0]) cylinder(10, 2, 2, $fn=100);
  }

}


module back() {
  difference() {
    union() {
      roundedcube([$boardh+($walls*4)+10, $boardw+($walls*4), 11], false, 2, "zmin", $fn=100);
      rotate([90,0,0]) translate([$boardh+7, -11+3.4, -($boardw+($walls*4))/2]) gopro_connector("double");
    }
    translate([$walls-0.95,$walls-1.1, 5.4]) roundedcube([$boardh+($walls*2)+11.9,$boardw+($walls*2)+2,7.7], false, 2, "zmax", $fn=100);
    translate([$walls, ($walls*2)+1, 1.6]) cube([$boardh+($walls*3), $boardw-2, 9.4]);
    translate([$boardh+($walls*3), $walls-0.125, 3.2]) cube([10, $boardw+($walls*2)+0.25, 9.4]);
    translate([-0.5,($walls*2)+9,6.1]) rotate([0,90,0]) cylinder(5, 2.85, 2.85, $fn=100);
    translate([-0.5,($walls*2)+9-2.85,12]) rotate([0,90,0]) cube([6, 2.85*2, 5]);
    translate([-0.1,$walls+$boardw-9.3,6]) cube([3,9,9.6]);
    // translate([28.5,3.6,-1]) cube([14,8.5,13]); // Programming Port
  }
  
}

translate([0,-10,9.6]) rotate([180,0,0]) front();
// rotate([180,0,0]) back();